Distillation, Vaporization, Evaporation etc

Distillation, Vaporization, Evaporation etc

• 1.
  Some Terminology Definition ofDistillation: Distillation is the technique of heating a liquid to create vapor which is collected when cooled separate from the original liquid. Distillation is a method of separating mixtures based on differences in their boiling points. It is a unit operation, or a physical separation process, and not a chemical reaction. It is a technique used by chemists to separate compounds in a mixture by boiling point. The mixture of compounds is boiled from a still pot in a distillation apparatus equipped with a condenser and a receiving flask. Ideally, the lighter, lower-boiling compound will vaporize first, collect in the condenser, and drop to the receiving flask. After the first compound has collected, the second, higher- boiling compound will start to vaporize, condense, and collect. Material that is left in the original still pot can be combined with fractions of collected material that contain a mixture of compounds and resubjected to a second distillation. Distillation is used commercially to concentrate alcohol for spirits and purify water. Examples: Pure water can be separated from salt water through distillation. Salt water is boiled to create water steam, but the salt remains in the solution. The steam is collected and allowed to cool back into salt-free water. Definition Vaporization: Vaporization is the process that occurs when a chemical or element is converted from a liquid or a solid to a gas. Act of vaporizing or the state of being vaporized. When a liquid is converted to a gas, the process is called evaporation or boiling; when a solid is converted to a gas, the process is called sublimation. Vaporization is the transition of matter from a solid or liquid phase into a gaseous (or vapor) phase. Water boiling into steam is an example of vaporization. Vaporization of an element or compound is a phase transition from the liquid or solid phase to gas phase. Vaporization is an important step in the water cycle. There are three types of vaporization: evaporation, boiling and sublimation.
• 2.
  Definition of Evaporation: Evaporationis a phase transition from the liquid phase to gas phase that occurs at temperatures below the boiling temperature at a given pressure. Evaporation usually occurs on the surface. It is a type of vaporization of a liquid that occurs only on the surface of a liquid. The other type of vaporization is boiling, which, instead, occurs on the entire mass of the liquid. Evaporation is also part of the water cycle. On average, the molecules in a glass of water do not have enough heat energy to escape from the liquid. With sufficient heat, the liquid would turn into vapor quickly. When the molecules collide, they transfer energy to each other in varying degrees, based on how they collide. Sometimes the transfer is so one-sided for a molecule near the surface that it ends up with enough energy to 'escape' (evaporate). Liquids that do not evaporate visibly at a given temperature in a given gas (e.g., cooking oil at room temperature) have molecules that do not tend to transfer energy to each other in a pattern sufficient to frequently give a molecule the heat energy necessary to turn into vapor. However, these liquids are evaporating. It is just that the process is much slower and thus significantly less visible. Definition of Boiling: Boiling is a phase transition from the liquid phase to gas phase that occurs at or above the boiling temperature. Boiling, as opposed to evaporation, occurs below the surface. Boiling is the rapid vaporization of a liquid, which occurs when a liquid is heated to its boiling point, the temperature at which the vapor pressure of the liquid is equal to the pressure exerted on the liquid by the surrounding environmental pressure. While below the boiling point a liquid evaporates from its surface, at the boiling point vapor bubbles come from the bulk of the liquid. For this to be possible, the vapor pressure must be sufficiently high to win the atmospheric pressure, so that the bubbles can be "inflated". Thus, the difference between evaporation and boiling is "mechanical", rather than thermodynamical. The boiling point is lowered when the pressure of the surrounding atmosphere is reduced, for example by the use of a vacuum pump or at high altitudes. Boiling occurs in three
• 3.
  characteristic stages, whichare nucleate, transition and film boiling. These stages generally take place from low to high heating surface temperatures, respectively. Definition of Sublimation: Sublimation refers to the process of transition of a substance from the solid phase to the gas phase without passing through an intermediate liquid phase. Sublimation is an endothermic phase transition that occurs at temperatures and pressures below a substance's triple point in its phase diagram. At normal pressures, most chemical compounds and elements possess three different states at different temperatures. In these cases the transition from the solid to the gaseous state requires an intermediate liquid state. Note, however, that the pressure referred to here is the partial pressure of the substance, not the total (e.g. atmospheric) pressure of the entire system. So, all solids which possess an appreciable vapor pressure at a certain temperature usually can sublime in air (e.g. ice just below 0°C). For some substances, such as carbon and arsenic, sublimation is much easier than evaporation from the melt, because the pressure of their triple point is very high, and it is difficult to obtain them as liquids. Sublimation requires additional energy and is an endothermic change. The enthalpy of sublimation (also called heat of sublimation) can be calculated as the enthalpy of fusion plus the enthalpy of vaporization. The reverse process of sublimation is deposition. The formation of frost is an example of meteorological deposition. Definition of Reflux: Reflux is a technique involving the condensation of vapors and the return of this condensate to the system from which it originated. It is used in industrial and laboratory distillations. It is also used in chemistry to supply energy to reactions over a long period of time. The term reflux is very widely used in industries that utilize large-scale distillation columns and fractionators such as petroleum refineries, petrochemical and chemical plants, and natural gas processing plants.
• 4.
  In that context,reflux refers to the portion of the overhead liquid product from a distillation column or fractionator that is returned to the upper part of the column as shown in the schematic diagram of a typical industrial distillation column. Inside the column, the downflowing reflux liquid provides cooling and condensation of the upflowing vapors thereby increasing the efficiency of the distillation column. The more reflux provided for a given number of theoretical plates, the better is the column's separation of lower boiling materials from higher boiling materials. Conversely, for a given desired separation, the more reflux is provided, the fewer theoretical plates are required. Definition of Filtration: Filtration is used to separate particles and fluid in a suspension, where the fluid can be a liquid, a gas or a supercritical fluid. Depending on the application, either one or both of the components may be isolated. It is a technique used either to remove impurities from an organic solution or to isolate an organic solid. The two types of filtration commonly used in organic chemistry laboratories are gravity filtration and vacuum or suction filtration. Filtration, as a physical operation is very important in chemistry for the separation of materials of different chemical composition. A solvent is chosen which dissolves one component, while not dissolving the other. By dissolving the mixture in the chosen solvent, one component will go into the solution and pass through the filter, while the other will be retained. This is one of the most important techniques used by chemists to purify compounds. ). Filtration is also used to describe some biological processes, especially in water treatment and sewage treatment in which undesirable constituents are removed by adsorption into a biological film grown on or in the filter medium.